Back to jobs
WO-3090 Committed
5 × Ford Barra Billet Manifold
MAN-BARRA · Manual stock build
Kit short: Machined Plenum Body (need 5, have 1), Billet Runner Set (6) (need 5, have 0), Billet Fuel Rail (need 5, have 2), Head Flange Plate (need 5, have 3), Bosch 1000cc Injector (need 30, have 8), Injector O-ring Seal (need 60, have 30), 82mm DBW Throttle Body (need 5, have 1), Hard Anodising — per manifold (need 5, have 0)
Job cost
$9,716
$9,716 material · $0 labour
Machine
CNC 2
Due
27 June 2026
Est. hours
80h
Logged
0h
Stages — tick off as you go
Program & setup
5h est.
CNC machining
48h est.
Deburr & tap
8h est.
Anodising
outsourced · GC Anodising
Assembly
12h est.
QC & pack
7h est.
Documents
Drawings & setup sheets, copied from the item code when this job was raised. Open one to mark it up — your scribbles save against this work order.
No documents on this job yet.
Job notes
Materials for this build
9 parts · $9,716| Part | Qty | Unit cost | Cost |
|---|---|---|---|
| Machined Plenum Body PRT-PLENUM | 5 ea | $420.00 | $2,100.00 |
| Billet Runner Set (6) PRT-RUNNER | 5 ea | $360.00 | $1,800.00 |
| Billet Fuel Rail PRT-FUELRAIL | 5 ea | $150.00 | $750.00 |
| Head Flange Plate PRT-FLANGE | 5 ea | $95.00 | $475.00 |
| Bosch 1000cc Injector HW-INJ | 30 ea | $78.00 | $2,340.00 |
| Injector O-ring Seal HW-ORING | 60 ea | $1.40 | $84.00 |
| M6x20 Socket Head Cap Screw HW-M6 | 120 ea | $0.35 | $42.00 |
| 82mm DBW Throttle Body HW-TB82 | 5 ea | $340.00 | $1,700.00 |
| Hard Anodising — per manifold SVC-ANODISE | 5 ea | $85.00 | $425.00 |
Time logged
| No time logged yet. |